Independent browser practice
Use a short head-level placement drill before you queue. This CS2 practice crosshair placement routine uses a stable guide line and target offsets, then shows head-level accuracy and vertical error instead of one highlight number.
01 / crosshair placement trainer
Head-level positioning drill
Click each target when it appears. Its distance above or below the head-level guide becomes your vertical-error signal.
Start the drill, then click each target as it appears. Its position relative to the head-level guide is recorded.
02 / results
Head-level accuracy tells you how often your click started near the guide. Average vertical error shows how far the misses drifted; read both beside the streak.
Finish one 45-second run above to populate the browser result ledger.
Placement trace
Each bar shows the vertical distance from the head-level guide for one click.
Read the result
A completed run will explain what this metric says and what it does not say.
Local history
| Date | Targets | Head level | Vertical error |
|---|
Your completed runs will appear here when local storage is available.
03 / how it works
Crosshair placement is a pre-aim habit: keep your crosshair near the height and angle where a player could appear so the final correction is smaller. This tool isolates the height part before you test the habit in a real map.
Most crosshair placement advice becomes vague when height and angle are mixed together. The line in this drill gives you one stable reference. Targets near it represent a tighter height baseline; use real map geometry to add the correct horizontal angle.
A click can be fast while starting far below the likely head position. Average vertical error makes that drift visible. A lower error with a similar target count is a useful practice change even when the browser score is not faster.
After one or two browser runs, open a normal CS2 map or Workshop routine. Pre-aim common head height, clear one angle at a time, and compare the same setup after a warm-up. This page cannot replace map geometry or opponent movement.
Example output
Suppose a run records 22 targets, 77% head-level placement, 34 px average vertical error and a 6-hit streak. That suggests a usable baseline with occasional height drift. Repeat the same drill after changing one habit instead of treating 77% as a universal grade.
Head-level. The share of clicks inside the guide tolerance.
Vertical error. Average pixel distance from the guide at click time.
Streak. Consecutive clicks inside the tolerance band.
04 / choose the right drill
Each tool answers a different question. Keep the result types separate so a faster click does not hide a positioning problem.
Practice head-level positioning and inspect vertical error before speed. Use it as a short pre-aim warm-up.
Run a continuous target loop for hits, misses, accuracy, average hit time and streak once the crosshair is already placed.
Rehearse A/D counter-strafe input order and shot delay separately from mouse positioning.
Suggested loop. Run this crosshair placement drill first, then use the CS2 aim trainer for target acquisition. If your stop timing is the issue, switch to the movement trainer.
05 / scope and privacy
The target lane is generated in the browser. It does not know a player's model, map elevation, wall angle, peeker's advantage, weapon spread or server tick.
Display size, pointer hardware, browser scheduling and fatigue affect the interaction. Compare the same device, browser and warm-up rather than treating the score as a global rank.
No sign-in is required. When storage is available, a small history object remains in this browser. Clearing site data or private browsing can remove it.
For the site's broader data and advertising disclosures, review the privacy policy. For acceptable use and measurement boundaries, see the terms and disclaimer.
06 / faq
Crosshair placement means keeping your crosshair near the height and angle where an opponent could appear. The goal is to reduce the size of the final adjustment before the shot. This page isolates head-level positioning in a browser lane.
Start the 45-second drill and click each target as it appears. The result records target count, the share of targets inside the head-level tolerance, average vertical error and best streak.
There is no universal stat that transfers from this browser lane to every map. Use head-level percentage and vertical error as within-setup signals, then verify the habit in a real map with the same sensitivity and display.
Use the guide as a stable height reference, then repeat the same angle in a real map. Use lower target vertical error as the immediate practice signal and change one setup variable at a time.
No. It is an abstract positioning exercise. It does not simulate map geometry, player movement, hitboxes, recoil, weapon accuracy or network timing.
Use this page when the question is whether your pointer starts at head height. Use the CS2 aim trainer when you want a longer target loop with hits, misses, accuracy and streak.
No account is required. Recent summaries are stored in the browser's local storage when allowed. Clearing site data, private browsing or storage restrictions can remove or prevent that history.